ConCore Raised Access Floor Panel

The Concore raised access floor system is designed for data centres and commercial applications. The panels are epoxy coated unitized shells. These shells consist of a flat steel top sheet welded to a formed steel bottom sheet. The panels are then filled with a highly controlled mixture of lightweight cement.

They are then supported by steel understructure systems, which are two different support structures for different load requirements, including bolted stringer and cornerlock. These structures are comprised of steel pedestals and horizontal stringers which provide lateral resistance.

The panels come in different variations, depending on loading requirements, including Concore 800, Concore 1000, Concore 1250, Concore 1500, Concore 2000, Concore 2500 and Concore 3000. The understructures are also available in varying heights to suit required applications, ranging from typical floor heights 15cm to 60cm for cornerlock systems and from 60cm-90cm for bolted stringer systems.

They can also be used with a variety of floor finishes, including Terrazzo and High Pressure Laminate. The finishes and materials for their installation are not contained within this EPD.

Detailed information

Digital EPD

ECO Platform ↗ search for the individual EPD via the company name and product. Note: there can be a considerable lag between publication of an EPD in PDF format and availability of digital EPD data in XML and CSV formats. Contact us if data is not available for your EPD. Digital data is not available for older EPDs.