ALPOLIC™ NC / ALPOLIC™ A1
Mitsubishi Chemical Infratec Co., Ltd.
ALPOLIC™ NC / ALPOLIC™ A1 is composed of non-combustible core sandwiched between two skins of 0.5mm thick aluminum alloy (3105-H14) and is manufactured by Mitsubishi Chemical Infratec Co., Ltd in Japan. The non-combustible core material has a calorific value of less than 1 MJ/kg when tested in accordance with EN13501-1. ALPOLIC™ NC / ALPOLIC™ A1 is now A1 Classified in accordance with EN13501-1 and is the first ACP in the world to have achieved this milestone. Like all ALPOLIC™ products, ALPOLIC™ NC / ALPOLIC™ A1 is easy to fabricate, has excellent weatherability, good impact resistance and extremely flat without any oil canning. The surface is finished with a high-performance Lumiflon™-based fluoropolymer coating as standard and is protected with a co-extruded (white/black) removable, self-adhesive protection film. . ALPOLIC™ NC / ALPOLIC™ A1 is available in finishes of: Solid Colors, Metallic Colors, Sparkling Colors, Prismatic Colors and Patterns. In these finishes, Lumiflon-based fluoropolymer paints are applied in manufacturer’s continuous coil coating lines. The back side of ALPOLIC™ NC / ALPOLIC™ A1, which will face the structural wall or steel when it is installed as a cladding panel, has a polyester-based wash coating or a service coating to protect it from possible corrosion problems. ALPOLIC™ NC / ALPOLIC™ A1 is highly recommended for exterior or interior claddings, soffit linings and roof covering in new buildings and retrofit applications wherever a non-combustible material is required.
Company: | Mitsubishi Chemical Infratec Co., Ltd. |
Products: | ALPOLIC™ NC / ALPOLIC™ A1 |
Registration No: | S-P-03725 Version 1.1 |
Registration date: | 2021-08-24 |
Version date: | 2022-09-22 |
Valid until: | 2026-08-24 |
Verified by: | Jonas Bengtsson, Edge Environment |
Reference PCR(s): | Construction products; 2019:14; version 1.1 |
Geographical scope: | Japan and Australia |
EN 15804 | The EPD is compliant with EN 15804 |